PIC18F97J60-I/PF Microchip Technology, PIC18F97J60-I/PF Datasheet - Page 351

• Manufacturer Part Number: PIC18F97J60-I/PF
• Description: IC PIC MCU FLASH 65KX16 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F97J60-I/PF

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: 100-TQFP, 100-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 41.667MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 70
• Ram Size: 3808 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3808 B
• Interface Type: Display Driver/Ethernet/EUSART/I2C/MSSP/SPI
• Maximum Clock Frequency: 41.667 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 5
• Operating Supply Voltage: 2.35 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183033
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• Package: 100TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 41.667 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162064 - HEADER INTFC MPLABICD2 64/80/100DM163024 - BOARD DEMO PICDEM.NET 2
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 24-6:
© 2006 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value when device is unprogrammed
bit 7-3
bit 2
bit 1
bit 0
Note 1:
—
U-0
2:
(1)
The value of these bits in program memory should always be ‘1’. This ensures that the location is
executed as a NOP if it is accidentally executed.
Implemented on 80-pin and 100-pin devices only.
Unimplemented: Read as ‘0’
ETHLED: Ethernet LED Enable bit
1 = RA0/RA1 are multiplexed with LEDA/LEDB when the Ethernet module is enabled and function as
0 = RA0/RA1 function as I/O regardless of Ethernet module status
ECCPMX: ECCP MUX bit
1 = ECCP1 outputs (P1B/P1C) are multiplexed with RE6 and RE5;
0 = ECCP1 outputs (P1B/P1C) are multiplexed with RH7 and RH6;
CCP2MX: ECCP2 MUX bit
1 = ECCP2/P2A is multiplexed with RC1
0 = ECCP2/P2A is multiplexed with RE7 in Microcontroller mode (80-pin and 100-pin devices)
—
I/O when the Ethernet is disabled
ECCP3 outputs (P3B/P3C) are multiplexed with RE4 and RE3
ECCP3 outputs (P3B/P3C) are multiplexed with RH5 and RH4
or with RB3 in Extended Microcontroller mode (100-pin devices only)
U-0
(1)
CONFIG3H: CONFIGURATION REGISTER 3 HIGH (BYTE ADDRESS 300005h)
WO = Write-Once bit
—
U-0
(1)
(2)
(2)
—
U-0
Preliminary
(1)
U = Unimplemented bit, read as ‘0’
‘1’ = Bit is set
PIC18F97J60 FAMILY
U-0
—
ETHLED
R/WO-1
‘0’ = Bit is cleared
ECCPMX
R/WO-1
DS39762B-page 349
(2)
CCP2MX
R/WO-1
bit 0
(2)