PIC18F97J60-I/PF Microchip Technology, PIC18F97J60-I/PF Datasheet - Page 353

• Manufacturer Part Number: PIC18F97J60-I/PF
• Description: IC PIC MCU FLASH 65KX16 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F97J60-I/PF

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: 100-TQFP, 100-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 41.667MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 70
• Ram Size: 3808 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3808 B
• Interface Type: Display Driver/Ethernet/EUSART/I2C/MSSP/SPI
• Maximum Clock Frequency: 41.667 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 5
• Operating Supply Voltage: 2.35 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183033
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• Package: 100TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 41.667 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162064 - HEADER INTFC MPLABICD2 64/80/100DM163024 - BOARD DEMO PICDEM.NET 2
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

24.2
For PIC18F97J60 family devices, the WDT is driven by
the INTRC oscillator. When the WDT is enabled, the
clock source is also enabled. The nominal WDT period
is 4 ms and has the same stability as the INTRC
oscillator.
The 4 ms period of the WDT is multiplied by a 16-bit
postscaler. Any output of the WDT postscaler is
selected by a multiplexor, controlled by the WDTPS bits
in Configuration Register 2H. Available periods range
from 4 ms to 131.072 seconds (2.18 minutes). The
WDT and postscaler are cleared whenever a SLEEP or
CLRWDT instruction is executed, or a clock failure
(primary or Timer1 oscillator) has occurred.
FIGURE 24-1:
REGISTER 24-9:
TABLE 24-2:
© 2006 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-1
bit 0
Note 1:
RCON
WDTCON
Legend: — = unimplemented, read as ‘0’. Shaded cells are not used by the Watchdog Timer.
WDTPS3:WDTPS0
Name
All Device Resets
U-0
INTRC Oscillator
—
Watchdog Timer (WDT)
This bit has no effect if the Configuration bit, WDTEN, is enabled.
SWDTEN
CLRWDT
Unimplemented: Read as ‘0’
SWDTEN: Software Controlled Watchdog Timer Enable bit
1 = Watchdog Timer is on
0 = Watchdog Timer is off
Sleep
IPEN
Bit 7
SUMMARY OF WATCHDOG TIMER REGISTERS
—
U-0
—
WDT BLOCK DIAGRAM
WDTCON: WATCHDOG TIMER CONTROL REGISTER
Bit 6
Enable WDT
—
—
W = Writable bit
‘1’ = Bit is set
U-0
—
WDT Counter
Bit 5
CM
—
128
INTRC Control
4
U-0
Bit 4
—
Preliminary
Programmable Postscaler
RI
—
1:1 to 1:32,768
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
Bit 3
PIC18F97J60 FAMILY
TO
—
24.2.1
The WDTCON register (Register 24-9) is a readable
and writable register. The SWDTEN bit enables or dis-
ables WDT operation. This allows software to override
the WDTEN Configuration bit and enable the WDT only
if it has been disabled by the Configuration bit.
U-0
—
Note 1: The CLRWDT and SLEEP instructions
WDT
2: When a CLRWDT instruction is executed,
Bit 2
PD
—
(1)
CONTROL REGISTER
clear the WDT and postscaler counts
when executed.
the postscaler count will be cleared.
Reset
U-0
—
Bit 1
POR
—
x = Bit is unknown
SWDTEN
U-0
Bit 0
BOR
—
DS39762B-page 351
Wake-up from
Power-Managed
Modes
WDT
Reset
Reset Values
SWDTEN
on Page:
R/W-0
60
60
bit 0
(1)