PIC18F97J60-I/PF Microchip Technology, PIC18F97J60-I/PF Datasheet - Page 215

• Manufacturer Part Number: PIC18F97J60-I/PF
• Description: IC PIC MCU FLASH 65KX16 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F97J60-I/PF

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: 100-TQFP, 100-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 41.667MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 70
• Ram Size: 3808 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3808 B
• Interface Type: Display Driver/Ethernet/EUSART/I2C/MSSP/SPI
• Maximum Clock Frequency: 41.667 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 5
• Operating Supply Voltage: 2.35 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183033
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• Package: 100TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 41.667 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162064 - HEADER INTFC MPLABICD2 64/80/100DM163024 - BOARD DEMO PICDEM.NET 2
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 18-2:
REGISTER 18-3:
© 2006 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4-0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
AUTOINC
R/W-1
U-0
—
This bit is automatically cleared once it is set.
AUTOINC: Automatic Buffer Pointer Increment Enable bit
1 = Automatically increment ERDPT or EWRPT registers on reading from or writing to EDATA
0 = Do not automatically change ERDPT and EWRPT registers after EDATA is accessed
PKTDEC: Packet Decrement bit
1 = Decrement the EPKTCNT register by one
0 = Leave EPKTCNT unchanged
ETHEN: Ethernet Module Enable bit
1 = Ethernet module enabled
0 = Ethernet module disabled
Unimplemented: Read as ‘0’
Unimplemented: Read as ‘0’
BUFER: Ethernet Buffer Error Status bit
1 = An Ethernet read or write has generated a buffer error (overrun or underrun)
0 = No buffer error has occurred
Unimplemented: Read as ‘0’
Reserved: Write as ‘0’
Unimplemented: Read as ‘0’
RXBUSY: Receive Busy bit
1 = Receive logic is receiving a data packet
0 = Receive logic is idle
TXABRT: Transmit Abort Error bit
1 = The transmit request was aborted
0 = No transmit abort error
PHYRDY: Ethernet PHY Clock Ready bit
1 = Ethernet PHY start-up timer has expired; PHY is ready
0 = Ethernet PHY start-up timer is still counting; PHY is not ready
PKTDEC
R/W-0
BUFER
R/C-0
ECON2: ETHERNET CONTROL REGISTER 2
ESTAT: ETHERNET STATUS REGISTER
(1)
W = Writable bit
‘1’ = Bit is set
C = Clearable bit
‘1’ = Bit is set
ETHEN
R/W-0
U-0
—
R/C-0
U-0
Preliminary
—
r
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
PIC18F97J60 FAMILY
U-0
U-0
—
—
RXBUSY
U-0
R-0
—
x = Bit is unknown
x = Bit is unknown
TXABRT
R/C-0
U-0
—
DS39762B-page 213
PHYRDY
U-0
R-0
—
bit 0
bit 0