PIC18F97J60-I/PF Microchip Technology, PIC18F97J60-I/PF Datasheet - Page 238

• Manufacturer Part Number: PIC18F97J60-I/PF
• Description: IC PIC MCU FLASH 65KX16 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F97J60-I/PF

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: 100-TQFP, 100-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 41.667MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 70
• Ram Size: 3808 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3808 B
• Interface Type: Display Driver/Ethernet/EUSART/I2C/MSSP/SPI
• Maximum Clock Frequency: 41.667 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 5
• Operating Supply Voltage: 2.35 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183033
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• Package: 100TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 41.667 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162064 - HEADER INTFC MPLABICD2 64/80/100DM163024 - BOARD DEMO PICDEM.NET 2
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC18F97J60 FAMILY
TABLE 18-4:
DS39762B-page 236
55-52
47-32
19-16
15-0
Bit
51
50
49
48
31
30
29
28
27
26
25
24
23
22
21
20
Zero
Transmit VLAN Tagged Frame
Backpressure Applied
Transmit Pause Control Frame
Transmit Control Frame
Total Bytes Transmitted on Wire
Transmit Underrun
Transmit Giant
Transmit Late Collision
Transmit Excessive Collision
Transmit Excessive Defer
Transmit Packet Defer
Transmit Broadcast
Transmit Multicast
Transmit Done
Transmit Length Out of Range
Transmit Length Check Error
Transmit CRC Error
Transmit Collision Count
Transmit Byte Count
TRANSMIT STATUS VECTORS
Field
Byte count for frame was greater than the MAMXFL registers.
Indicates that frame type/length field was larger than 1500 bytes (type
0
Frame’s length/type field contained 8100h which is the VLAN protocol
identifier.
Reserved, do not use.
The frame transmitted was a control frame with a valid pause opcode.
The frame transmitted was a control frame.
Total bytes transmitted on the wire for the current packet, including all
bytes from collided attempts.
The transmission was aborted due to insufficient buffer memory
bandwidth to sustain the 10 Mbit/s transmit rate.
Collision occurred after 64 bytes had already been transmitted.
Packet was aborted after the number of collisions exceeded 15, the
retransmission maximum.
Packet was deferred in excess of 24,287 bit times (2.4287 ms), due to a
continuously-occupied medium.
Packet was deferred for at least one attempt but less than an excessive
defer.
Packet’s destination address was a Broadcast address.
Packet’s destination address was a Multicast address.
Transmission of the packet was completed successfully.
field).
Indicates that frame length field value in the packet does not match the
actual data byte length and is not a type field. The FRMLNEN bit
(MACON3<1>) must be set to get this error.
The attached CRC in the packet did not match the internally generated
CRC.
Number of collisions the current packet incurred during transmission
attempts. It applies to successfully transmitted packets and as such, will
not show the possible maximum count of 16 collisions.
Total bytes in frame not counting collided bytes.
Preliminary
Description
© 2006 Microchip Technology Inc.