HD6417660 RENESAS [Renesas Technology Corp], HD6417660 Datasheet - Page 51

• Manufacturer Part Number: HD6417660
• Description: Renesas 32-Bit RISC Microcomputer
• Manufacturer: RENESAS [Renesas Technology Corp]

Pin No.
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
D12
D13
D14
D15
D16
D17
E1
E2
E3
Pin Name
PTG3/SCIF0_ RTS
PTG4/SCIF0_ CTS
PTH0/SCIF1_SCK/IRQ4
Vcc (SREG)
Vcc (DLL)
Vss
AVcc (DAC)
Vcc (I/O)
NC
RDI_CTRL4*
Vcc_28
RESETP
USB_PWR_EN/
USB_PULLUP
Vcc (PLL)
V
Vss (PLL)
PTA6/SIOF_SS2
PTG1/SCIF0_TxD
Vss
DD
(PLL)
1
Description
Port G/RTS output for SCIF0
Though this pin is fixed to input and enters the output Hi-
Z state in the initial state, the internal pull-up MOS is
turned on.
Port G/CTS input for SCIF0
Though this pin is fixed to input and enters the output Hi-
Z state in the initial state, the internal pull-up MOS is
turned on.
Port H/clock I/O for SCIF1/external interrupt request
input
Though this pin is fixed to input and enters the output Hi-
Z state in the initial state, the internal pull-up MOS is
turned on.
Power supply for internal regulator (sub) (3.3 V)
Power supply for internal regulator (DLL) (3.3 V)
Power supply (0 V)
Analog power supply for D/A converter (DAC) (3.3 V)
Power supply for I/O (3.3 V)
Reserved
This pin should be open.
Reset control for RF IC and power-down control output
Power supply for I/O pin with RF IC (2.8 V/3.3 V)
Power-on reset input
USB power-supply application enable control output/pull-
up control output for USB
The initial state is low-level output.
Power supply for internal regulator (PLL1/PLL2) (3.3 V)
Power supply output from internal regulator/power-
supply input (PLL1/PLL2) (1.5 V)
Power supply for internal regulator (PLL1/PLL2) (0 V)
Port A/SPI mode slave device select for SIOF
Though this pin is fixed to input and enters the output Hi-
Z state in the initial state, the internal pull-up MOS is
turned on.
Port G/transmit data output for SCIF0
This pin is fixed to input and enters the output Hi-Z state
in the initial state.
Power supply (0 V)
Rev. 1.00, 02/04, page 13 of 804