R4F24278NVFQU Renesas Electronics America, R4F24278NVFQU Datasheet - Page 128

• Manufacturer Part Number: R4F24278NVFQU
• Description: MCU 512K/48K 2.7-5.5V 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2400r

Specifications of R4F24278NVFQU

• Core Processor: H8S/2600
• Core Size: 16/32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, I²C, IrDA, SCI, Smart Card, SPI, SSU, UART/USART
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 98
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-LQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Section 4 Resets
Note that some registers are not initialized by any of the resets. The following describes the CPU
internal registers.
The PC, one of the CPU internal registers, is initialized by loading the start address from vector
addresses with the reset exception handling. At this time, the T bit in EXR is cleared to 0 and the I
bits in EXR and CCR are set to 1. The general registers and other bits in CCR are not initialized.
The initial value of the SP (ER7) is undefined. The SP should be initialized using the MOV.L
instruction immediately after a reset. For details, see section 2, CPU. For other registers that are
not initialized by a reset, see register descriptions in each section.
When a reset is canceled, the reset exception handling is started. For the reset exception handling,
see section 5, Exception Handling.
4.2
Table 4.2 shows the pin related to resets.
Table 4.2
Page 98 of 1448
Pin Name
Reset
Input/Output Pin
Pin Configuration
Symbol
RES
I/O
Input
H8S/2427, H8S/2427R, H8S/2425 Group
REJ09B0565-0100 Rev. 1.00
Function
Reset input
Jul 22, 2010