SAM9263 Atmel Corporation, SAM9263 Datasheet - Page 178

• Manufacturer Part Number: SAM9263
• Manufacturer: Atmel Corporation

Specifications of SAM9263

• Flash (kbytes): 0 Kbytes
• Pin Count: 324
• Max. Operating Frequency: 240 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 160
• Ext Interrupts: 160
• Usb Transceiver: 3
• Usb Speed: Full Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 1
• Uart: 4
• Can: 1
• Ssc: 2
• Ethernet: 1
• Sd / Emmc: 2
• Graphic Lcd: Yes
• Video Decoder: No
• Camera Interface: Yes
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 96
• Self Program Memory: NO
• External Bus Interface: 2
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Fpu: No
• Mpu / Mmu: No / Yes
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

21.5.6.5
6249I–ATARM–3-Oct-11
Application Example
Figure 21-6 on page 178
CFRNW signals are not directly connected to the CompactFlash slot 0, but do control the direc-
tion and the output enable of the buffers between the EBI and the CompactFlash Device. The
timing of the CFCS0 signal is identical to the NCS4 signal. Moreover, the CFRNW signal
remains valid throughout the transfer, as does the address bus. The CompactFlash _WAIT sig-
nal is connected to the NWAIT input of the Static Memory Controller. For details on these
waveforms and timings, refer to the Static Memory Controller Section.
Figure 21-6. CompactFlash Application Example
NWR1/CFIOR
NWR3/CFIOW
NCS4/CFCS0
A25/CFRNW
NWE/CFWE
EBI
NOE/CFOE
A22/REG
CD (PIO)
D[15:0]
NWAIT
CFCE1
CFCE2
A[10:0]
illustrates an example of a CompactFlash application. CFCS0 and
DIR
/OE
/OE
AT91SAM9263
CompactFlash Connector
D[15:0]
_CD1
_CD2
A[10:0]
_REG
_OE
_WE
_IORD
_IOWR
_CE1
_CE2
_WAIT
178