SAM9263 Atmel Corporation, SAM9263 Datasheet - Page 525

• Manufacturer Part Number: SAM9263
• Manufacturer: Atmel Corporation

Specifications of SAM9263

• Flash (kbytes): 0 Kbytes
• Pin Count: 324
• Max. Operating Frequency: 240 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 160
• Ext Interrupts: 160
• Usb Transceiver: 3
• Usb Speed: Full Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 1
• Uart: 4
• Can: 1
• Ssc: 2
• Ethernet: 1
• Sd / Emmc: 2
• Graphic Lcd: Yes
• Video Decoder: No
• Camera Interface: Yes
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 96
• Self Program Memory: NO
• External Bus Interface: 2
• Dram Memory: sdram
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Fpu: No
• Mpu / Mmu: No / Yes
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

Figure 34-4. Fractional Baud Rate Generator
34.6.1.4
34.6.1.5
6249I–ATARM–3-Oct-11
SCK
Reserved
MCK/DIV
MCK
Baud Rate in Synchronous Mode
Baud Rate in ISO 7816 Mode
USCLKS
0
1
2
3
clock divider. This feature is only available when using USART normal mode. The fractional
Baud Rate is calculated using the following formula:
The modified architecture is presented below:
If the USART is programmed to operate in synchronous mode, the selected clock is simply
divided by the field CD in US_BRGR.
In synchronous mode, if the external clock is selected (USCLKS = 3), the clock is provided
directly by the signal on the USART SCK pin. No division is active. The value written in
US_BRGR has no effect. The external clock frequency must be at least 4.5 times lower than the
system clock.
When either the external clock SCK or the internal clock divided (MCK/DIV) is selected, the
value programmed in CD must be even if the user has to ensure a 50:50 mark/space ratio on the
SCK pin. If the internal clock MCK is selected, the Baud Rate Generator ensures a 50:50 duty
cycle on the SCK pin, even if the value programmed in CD is odd.
The ISO7816 specification defines the bit rate with the following formula:
Baudrate
BaudRate
16-bit Counter
CD
=
---------------------------------------------------------------- -
⎛
⎝
8 2 Over
Modulus
=
Control
(
FP
SelectedClock
------------------------------------- -
SelectedClock
–
CD
) CD
⎛
⎝
glitch-free
USCLKS = 3
+
FP
------ -
logic
FP
8
⎞
⎠
⎞
⎠
SYNC
0
CD
>1
1
0
1
0
OVER
Sampling
Divider
FIDI
AT91SAM9263
0
1
SYNC
SCK
Baud Rate
Sampling
Clock
Clock
525