DF2148RTE20IV Renesas Electronics America, DF2148RTE20IV Datasheet - Page 317

• Manufacturer Part Number: DF2148RTE20IV
• Description: MCU 5V 128K I-TEMP,PB-FREE, 100-
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2148RTE20IV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: Host Interface, I²C, IrDA, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

8.11.4
Port A has a built-in MOS input pull-up function that can be controlled by software. This MOS
input pull-up function can be used in any operating mode, and can be specified as on or off on a
bit-by-bit basis.
When a PADDR bit is cleared to 0, setting the corresponding PAODR bit to 1 turns on the MOS
input pull-up for that pin. The MOS input pull-up for pins PA7 to PA4 is always off when IICS is
set to 1. When the keyboard buffer control pin function is selected for pins PA7 to PA2, the MOS
input pull-up is always off.
The MOS input pull-up function is in the off state after a reset and in hardware standby mode. The
prior state is retained in software standby mode.
Table 8.24 summarizes the MOS input pull-up states.
Table 8.24 MOS Input Pull-Up States (Port A)
Legend:
Off:
On/Off: On when PADDR = 0 and PAODR = 1; otherwise off.
Mode
1, 2, 3
MOS input pull-up is always off.
MOS Input Pull-Up Function
Reset
Off
Hardware
Standby Mode
Off
Rev. 4.00 Sep 27, 2006 page 271 of 1130
Software
Standby Mode
On/Off
In Other
Operations
On/Off
Section 8 I/O Ports
REJ09B0327-0400