DF2148RTE20IV Renesas Electronics America, DF2148RTE20IV Datasheet - Page 477

• Manufacturer Part Number: DF2148RTE20IV
• Description: MCU 5V 128K I-TEMP,PB-FREE, 100-
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2148RTE20IV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: Host Interface, I²C, IrDA, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Bit 5—Parity Enable (PE): In asynchronous mode, selects whether or not parity bit addition is
performed in transmission, and parity bit checking in reception. In synchronous mode, or when a
multiprocessor format is used, parity bit addition and checking is not performed, regardless of the
PE bit setting.
Note:
Bit 4—Parity Mode (O/E E E E ): Selects either even or odd parity for use in parity addition and
checking.
The O/E bit setting is only valid when the PE bit is set to 1, enabling parity bit addition and
checking, in asynchronous mode. The O/E bit setting is invalid in synchronous mode, when parity
bit addition and checking is disabled in asynchronous mode, and when a multiprocessor format is
used.
Notes: 1. When even parity is set, parity bit addition is performed in transmission so that the total
Bit 5
PE
0
1
Bit 4
O/E E E E
0
1
* When the PE bit is set to 1, the parity (even or odd) specified by the O/E bit is added to
2. When odd parity is set, parity bit addition is performed in transmission so that the total
In reception, a check is performed to see if the total number of 1 bits in the receive
In reception, a check is performed to see if the total number of 1 bits in the receive
transmit data before transmission. In reception, the parity bit is checked for the parity
(even or odd) specified by the O/E bit.
number of 1 bits in the transmit character plus the parity bit is even.
character plus the parity bit is even.
number of 1 bits in the transmit character plus the parity bit is odd.
character plus the parity bit is odd.
Description
Parity bit addition and checking disabled
Parity bit addition and checking enabled *
Description
Even parity *
Odd parity *
2
1
Section 15 Serial Communication Interface (SCI, IrDA)
Rev. 4.00 Sep 27, 2006 page 431 of 1130
REJ09B0327-0400
(Initial value)
(Initial value)