DF71251AD50FPV Renesas Electronics America, DF71251AD50FPV Datasheet - Page 159

• Manufacturer Part Number: DF71251AD50FPV
• Description: MCU RISC FLASH 32K 8K 64LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH Tinyr

Specifications of DF71251AD50FPV

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 37
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

7.3.4
1. By setting the SEQ bit in BRCR to 1, the sequential break is issued when a channel B break
2. In sequential break specification, the L or I bus can be selected and the execution times break
7.3.5
When a break occurs, the address of the instruction from where execution is to be resumed is
saved in the stack, and the exception handling state is entered. If the L bus is specified as a break
condition, the instruction at which the break should occur can be clearly determined (except for
when data is included in the break condition). If the I bus is specified as a break condition, the
instruction at which the break should occur cannot be clearly determined.
1. When instruction fetch (before instruction execution) is specified as a break condition:
2. When instruction fetch (after instruction execution) is specified as a break condition:
3. When data access (address only) is specified as a break condition:
condition matches after a channel A break condition matches. A user break is not generated
even if a channel B break condition matches before a channel A break condition matches.
When channels A and B conditions match at the same time, the sequential break is not issued.
To clear the channel A condition match when a channel A condition match has occurred but a
channel B condition match has not yet occurred in a sequential break specification, clear the
SEQ bit in BRCR to 0 and clear also the condition match flag to 0 in channel A.
condition can be also specified. For example, when the execution times break condition is
specified, the break condition is satisfied when a channel B condition matches with BETR =
H'0001 after a channel A condition has matched.
The address of the instruction that matched the break condition is saved in the stack. The
instruction that matched the condition is not executed, and the break occurs before it. However
when a delay slot instruction matches the condition, the address of the delayed branch
instruction is saved in the stack.
The address of the instruction following the instruction that matched the break condition is
saved in the stack. The instruction that matches the condition is executed, and the break occurs
before the next instruction is executed. However, when a delayed branch instruction or delay
slot matches the condition, these instructions are executed, and the branch destination address
is saved in the stack.
The address of the instruction immediately after the instruction that matched the break
condition is saved in the stack. The instruction that matches the condition is executed, and the
break occurs before the next instruction is executed. However when a delay slot instruction
matches the condition, the branch destination address is saved in the stack.
Sequential Break
Value of Saved Program Counter
Rev. 5.00 Mar. 06, 2009 Page 139 of 770
REJ09B0243-0500