DF71251AD50FPV Renesas Electronics America, DF71251AD50FPV Datasheet - Page 482

• Manufacturer Part Number: DF71251AD50FPV
• Description: MCU RISC FLASH 32K 8K 64LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH Tinyr

Specifications of DF71251AD50FPV

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 37
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

In receiving, the SCI operates as follows:
1. The SCI synchronizes with serial clock input or output and initializes internally.
2. Receive data is shifted into SCRSR in order from the LSB to the MSB. After receiving the
3. After setting RDRF to 1, if the receive-data-full interrupt enable bit (RIE) is set to 1 in
Rev. 5.00 Mar. 06, 2009 Page 462 of 770
REJ09B0243-0500
data, the SCI checks whether the RDRF flag is 0 and the receive data can be transferred from
SCRSR to SCRDR. If this check is passed, the SCI sets the RDRF flag to 1 and stores the
received data in SCRDR. If a receive error is detected, the SCI operates as shown in table
12.16. In this state, subsequent reception cannot be continued. In addition, the RDRF flag will
not be set to 1 after reception; be sure to clear the RDRF flag to 0.
SCSCR, the SCI requests a receive-data-full interrupt (RXI). If the ORER bit is set to 1 and the
RIE bit in SCSCR is also set to 1, the SCI requests a receive error interrupt (ERI).
Figure 12.12 Sample Flowchart for Receiving Serial Data (2)
No
Clear ORER flag in SCSSR to 0
Overrun error handling
Error handling
ORER = 1?
End
Yes