DF71251AD50FPV Renesas Electronics America, DF71251AD50FPV Datasheet - Page 325

• Manufacturer Part Number: DF71251AD50FPV
• Description: MCU RISC FLASH 32K 8K 64LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH Tinyr

Specifications of DF71251AD50FPV

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 37
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

3. Buffer Transfer Control Linked with Interrupt Skipping
Note: This function must always be used in combination with interrupt skipping.
In complementary PWM mode, whether to transfer data from a buffer register to a temporary
register and whether to link the transfer with interrupt skipping can be specified with the BTE1
and BTE0 bits in the timer buffer transfer set register (TBTER).
Figure 9.70 shows an example of operation when buffer transfer is suppressed (BTE1 = 0 and
BTE0 = 1). While this setting is valid, data is not transferred from the buffer register to the
temporary register.
Figure 9.71 shows an example of operation when buffer transfer is linked with interrupt
skipping (BTE1 = 1 and BET0 = 0). While this setting is valid, data is not transferred from the
buffer register outside the buffer transfer-enabled period.
The data transfer timing is two types. That is, from the buffer register to the temporary register
and from the temporary register to the buffer register. These timings depend on a programming
timing to the buffer register after an interrupt is generated.
Note that the buffer transfer-enabled period depends on the T3AEN and T4VEN bit settings in
the timer interrupt skipping set register (TITCR). Figure 9.72 shows the relationship between
the T3AEN and T4VEN bit settings in TITCR and buffer transfer-enabled period.
When interrupt skipping is disabled (the T3AEN and T4VEN bits in the timer interrupt
skipping set register (TITCR) are cleared to 0 or the skipping count set bits (3ACOR and
4VCOR) in TITCR are cleared to 0), make sure that buffer transfer is not linked with
interrupt skipping (clear the BTE1 bit in the timer buffer transfer set register (TBTER) to
0). If buffer transfer is linked with interrupt skipping while interrupt skipping is disabled,
buffer transfer is never performed.
Rev. 5.00 Mar. 06, 2009 Page 305 of 770
REJ09B0243-0500