DF2170BVTE33V Renesas Electronics America, DF2170BVTE33V Datasheet - Page 228

• Manufacturer Part Number: DF2170BVTE33V
• Description: IC H8S/2170 MCU FLASH 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2170BVTE33V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: SCI, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 76
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• For Use With: HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)3DK2166 - DEV EVAL KIT H8S/2166
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -

DREQ pin sampling is performed in each cycle starting at the next rise of φ after the end of the
DMMDR write cycle for setting the transfer-enabled state.
When a low level is sampled at the DREQ pin while acceptance via the DREQ pin is possible, the
request is held within the DMAC. Then when activation is initiated within the DMAC, the request
is cleared. At the end of the write cycle, acceptance resumes and DREQ pin low level sampling is
performed again; this sequence of operations is repeated until the end of the transfer.
Figure 7.23 shows an example of block transfer mode transfer activated by the DREQ pin low
level.
Rev. 2.00, 03/04, page 194 of 534
[1]
[2], [5] Request is cleared at end of next bus cycle, and activation is started in DMAC.
[3], [6] DMA cycle is started.
[4], [7] Acceptance is resumed after completion of write cycle.
φ
Address bus
DMA control
Channel
Figure 7.22 Example of Normal Mode Transfer Activated by DREQ Pin Low Level
Acceptance after transfer enabling;
(As in [1],
Idle
[1]
Minimum 3 cycles
Request
Bus release
pin low level is sampled at rise of φ, and request is held.)
[2]
Read
[3]
Request clearance period
Transfer source
DMA read
Write
DMA write
destination
Transfer
pin low level is sampled at rise of φ, and request is held.
Idle
Acceptance
resumed
[4]
Minimum 3 cycles
Request
Bus release
[5]
Read
Request clearance period
[6]
Transfer source
DMA read
Write
DMA write
destination
Transfer
Idle
Acceptance
resumed
[7]
Bus release