DF2170BVTE33V Renesas Electronics America, DF2170BVTE33V Datasheet - Page 358

• Manufacturer Part Number: DF2170BVTE33V
• Description: IC H8S/2170 MCU FLASH 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2170BVTE33V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: SCI, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 76
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• For Use With: HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)3DK2166 - DEV EVAL KIT H8S/2166
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -

Rev. 2.00, 03/04, page 324 of 534
Bit
24
23 to 18
17
16
15 to 10
9
Bit Name
MODE F

VBUS MN 0
VBUS F

EP3TR
Initial
Value
0
0
0
All 0
0
R/W
R/W
R
R
R/W
R
R/W
Description
USB Transfer Mode Change Detection
[Setting condition]
This bit is set to 1 when the USB mode status bits are
changed.
[Clearing conditions]
•
•
Reserved
The write value should always be 0.
This bit is a status bit which monitors the state of the
USVBUS pin. This bit reflects the state of the USVBUS
pin.
1: The USVBUS pin is connected.
0: The USVBUS pin is not connected.
USB Connection/disconnection Detection
[Setting condition]
This bit is set to 1 when the function is
connected/disconnected to/from the USB bus.
[Clearing conditions]
•
•
Reserved
The write value should always be 0.
EP3 Transfer Request
[Setting condition]
This bit is set to 1 if there is no valid data in the FIFO
when an IN token is sent from the host to EP3.
[Clearing conditions]
•
•
USB Connection Status
At a reset
When 0 is written to this bit
At a reset
When 0 is written to this bit
At a reset
When 0 is written to this bit