DF2170BVTE33V Renesas Electronics America, DF2170BVTE33V Datasheet - Page 429

• Manufacturer Part Number: DF2170BVTE33V
• Description: IC H8S/2170 MCU FLASH 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2170BVTE33V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: SCI, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 76
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• For Use With: HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)3DK2166 - DEV EVAL KIT H8S/2166
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -

b Flash pass/fail parameter (FPFR: general register R0L of CPU)
This parameter indicates the return value of the initialization result.
Programming Execution: When flash memory is programmed, the programming destination
address on the user MAT must be passed to the programming program in which the program data
is downloaded.
1. The start address of the programming destination on the user MAT must be stored in a general
2. The program data for the user MAT must be prepared in the consecutive area. The program
For details on the program processing procedure, see section 14.4.2, User Program Mode.
Bit
7 to 2
1
0
register ER1. This parameter is called as flash multipurpose address area parameter (FMPAR).
Since the program data is always in units of 128 bytes, the lower eight bits (A7 to A0) must be
H'00 or H'80 as the boundary of the programming start address on the user MAT.
data must be in the consecutive space which can be accessed by using the MOV.B instruction
of the CPU and in other than the flash memory space.
When data to be programmed does not satisfy 128 bytes, the 128-byte program data must be
prepared by filling with the dummy code H'FF.
The start address of the area in which the prepared program data is stored must be stored in a
general register ER0. This parameter is called as flash multipurpose data destination area
parameter (FMPDR).
Bit Name

FQ
SF
Initial
Value



R/W

R/W
R/W
Description
Unused
Return 0
Frequency Error Detect
Returns the check result whether the specified operating
frequency of the CPU is in the range of the supported
operating frequency.
0: Setting of operating frequency is normal
1: Setting of operating frequency is abnormal
Success/Fail
Indicates whether initialization is completed normally.
0: Initialization is ended normally (no error)
1: Initialization is ended abnormally (error occurs)
Rev. 2.00, 03/04, page 395 of 534