HD6417720BP133BV Renesas Electronics America, HD6417720BP133BV Datasheet - Page 1082

• Manufacturer Part Number: HD6417720BP133BV
• Description: SH3-DSP, WITH USB AND LCDC, PB-F
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417720BP133BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 133MHz
• Connectivity: FIFO, I²C, IrDA, MMC, SCI, SD, SIO, SIM, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 117
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Section 30 SIM Card Module (SIM)
5. If a normal frame is received, the pin retains its high-impedance state at the timing for
(b)
Figure 30.9 shows retransmit operations when the smart card interface is in transmit mode. Step
(1) to step (4) of figure 30.9 correspond to the following operation
1. After completion of transmission of one frame, if an error signal is returned from the receive
2. In T = 0 mode, the TEND bit in SCSSR is not set for a frame when an error signal indicating
3. If no error signal is returned from the receive side, the ERS bit in SCSSR is not set.
4. If no error signal is returned from the receive side, it is assumed that transmission of one
Page 1022 of 1414
RDRF
PER
transmission of error signals.
side, the ERS bit in SCSSR is set to 1. If the RIE bit in SCSCR is set to enable, an ERI request
is issued. The ERS bit in SCSSR should be cleared to 0 before the sampling timing for the next
parity bit.
an error is received.
frame, including retransmission, is completed, and the TEND bit in SCSSR is set to 1. At this
time, if the TIE bit in SCSCR is set to enable, a TEI interrupt request is issued.
Retransmission when the smart card interface is in transmit mode (T = 0)
Figure 30.8 Retransmission when Smart Card Interface is in Receive Mode
Ds
D0 D1 D2 D3 D4 D5 D6 D7 DP
nth transmit frame
DE
(1)
(2)
Ds
D0 D1 D2 D3 D4 D5 D6 D7 DP
Retransmit frame
(5)
(4)
(3)
(DE)
SH7720 Group, SH7721 Group
R01UH0083EJ0400 Rev. 4.00
Ds
D0 D1 D2 D3 D4
(n+1)th transmit frame
Sep 21, 2010