MCF5307CFT66B Freescale Semiconductor, MCF5307CFT66B Datasheet - Page 131

• Manufacturer Part Number: MCF5307CFT66B
• Description: IC MPU 32BIT 66MHZ COLDF 208FQFP
• Manufacturer: Freescale Semiconductor
• Series: MCF530xr

Specifications of MCF5307CFT66B

• Core Processor: Coldfire V3
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: EBI/EMI, I²C, UART/USART
• Peripherals: DMA, POR, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-FQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

Freescale Semiconductor, Inc.
Real-Time Trace Support
Figure 5-2 shows PSTCLK timing with respect to PST and DDATA.
PSTCLK
PST
DDATA
or
Figure 5-2. PSTCLK Timing
5.3 Real-Time Trace Support
Real-time trace, which defines the dynamic execution path, is a fundamental debug
function. The ColdFire solution is to include a parallel output port providing encoded
processor status and data to an external development system. This port is partitioned into
two 4-bit nibbles: one nibble allows the processor to transmit processor status, (PST), and
the other allows operand data to be displayed (debug data, DDATA). The processor status
may not be related to the current bus transfer.
External development systems can use PST outputs with an external image of the program
to completely track the dynamic execution path. This tracking is complicated by any
change in flow, especially when branch target address calculation is based on the contents
of a program-visible register (variant addressing). DDATA outputs can be configured to
display the target address of such instructions in sequential nibble increments across
multiple processor clock cycles, as described in Section 5.3.1, “Begin Execution of Taken
Branch (PST = 0x5).” Two 32-bit storage elements form a FIFO buffer connecting the
processor’s high-speed local bus to the external development system through PST[3:0] and
DDATA[3:0]. The buffer captures branch target addresses and certain data values for
eventual display on the DDATA port, one nibble at a time starting with the lsb.
Execution speed is affected only when both storage elements contain valid data to be
dumped to the DDATA port. The core stalls until one FIFO entry is available.
Table 5-2 shows the encoding of these signals.
Chapter 5. Debug Support
5-3
For More Information On This Product,
Go to: www.freescale.com