TMP89xy60UG/FG Toshiba, TMP89xy60UG/FG Datasheet - Page 121

• Manufacturer Part Number: TMP89xy60UG/FG
• Manufacturer: Toshiba

Specifications of TMP89xy60UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): M/F
• Rom Size: 32/60
• Ram Size: 3K
• Driver Led: 8
• Driver Lcd: -
• Spi/sio Channels: -
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 4
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: Y
• Number Of I/o Ports: 58
• Power Supply (v): 4.3 to 5.5

RA007
8.3.3
used as the serial bus interface input/output, the serial interface input/output, the UART input/output and the on-
chip debug function.
MOS output can be selected. Port P2 contains a programmable pull-up resistor on the VDD side. This pull-up
resistor can be used when the port is used in the input mode or as a sink open drain output.
selecting function is also needed. For details, refer to "8.4 Serial Interface Selecting Function".
Port P2 (P27 to P20)
Port P2 is an 8-bit input/output port that can be set to input or output for each bit individually, and it is also
The output circuit has the P-channel output control function and either the sink open drain output or the C-
When this port is used as the serial bus interface, the serial interface or the UART, setting for serial interface
For the on-chip debug function, refer to the chapter of "On-chip Debug Function (OCD)".
Table 8-8 Port P2
Secondary
function
P27
-
P26
-
SCLK0
P25
Page 105
SCL0
P24
SI0
SDA0
SO0
P23
SCLK0
P22
OCDIO
RXD0
P21
SI0
OCDCK
TXD0
SO0
P20
TMP89FS60