TMP89xy60UG/FG Toshiba, TMP89xy60UG/FG Datasheet - Page 345

• Manufacturer Part Number: TMP89xy60UG/FG
• Manufacturer: Toshiba

Specifications of TMP89xy60UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): M/F
• Rom Size: 32/60
• Ram Size: 3K
• Driver Led: 8
• Driver Lcd: -
• Spi/sio Channels: -
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 4
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: Y
• Number Of I/o Ports: 58
• Power Supply (v): 4.3 to 5.5

RA006
21.3.3
21.3.4
21.3.5
erase operation is not completed. To check the completion of the erase operation, perform read operations twice
on the same address in the flash memory, and perform polling until the same data is read from the flash memory.
During the erase operation, bit 6 is reversed each time a read is performed.
ID mode, the vendor ID, flash ID and security status can be read from the flash memory.
This command erases the entire flash memory.
The time needed to erase it is 30 ms maximum. The next command sequence cannot be executed if an ongoing
Data in the erased area is 0xFF.
This command activates the product ID mode. If an instruction to read the flash memory is executed in Product
This command is used to exit the Product ID mode.
Chip erase (all erase)
Product ID entry
Product ID exit
Table 21-3 Range of Addresses Specifiable
Table 21-4 Values to Be Read in Product ID Mode
(Code area)
(Code area)
AREA C0
AREA C1
Address
0xF000
0xF001
0xFF7F
Erase Area
0xC000 through 0xCFFF
0xD000 through 0xDFFF
Vendor ID
Flash ID
Security status
0xA000 through 0xAFFF
0xB000 through 0xBFFF
0xE000 through 0xEFFF
0xF000 through 0xFFFF
0x1000 through 0x1FFF
0x2000 through 0x2FFF
0x3000 through 0x3FFF
0x4000 through 0x4FFF
0x5000 through 0x5FFF
0x6000 through 0x6FFF
0x7000 through 0x7FFF
0x8000 through 0x8FFF
0x9000 through 0x9FFF
Meaning
Page 329
0x98
0x4D
0xFF:
Other than 0xFF: Security program enabled
<FAREA>
FLSCR1
11
10
Security program disabled
Address specified by instruction
(Address of 6th bus write cycle)
Read value
0xC000 through 0xCFFF
0xD000 through 0xDFFF
0xC000 through 0xCFFF
0xD000 through 0xDFFF
0xA000 through 0xAFFF
0xB000 through 0xBFFF
0xE000 through 0xEFFF
0xF000 through 0xFFFF
0xA000 through 0xAFFF
0xB000 through 0xBFFF
0xE000 through 0xEFFF
0xF000 through 0xFFFF
0x9000 through 0x9FFF
0x8000 through 0x8FFF
0x9000 through 0x9FFF
TMP89FS60