TMP89xy60UG/FG Toshiba, TMP89xy60UG/FG Datasheet - Page 370

• Manufacturer Part Number: TMP89xy60UG/FG
• Manufacturer: Toshiba

Specifications of TMP89xy60UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): M/F
• Rom Size: 32/60
• Ram Size: 3K
• Driver Led: 8
• Driver Lcd: -
• Spi/sio Channels: -
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 4
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: Y
• Number Of I/o Ports: 58
• Power Supply (v): 4.3 to 5.5

22.7
Memory Mapping
RA003
22.7
22.8
0x1000 through 0x1FFF in the code area respectively.
command) and an original program, data write or erase operations must be performed while switching between areas
by using the flash memory control registers (FLSCR1 and 2). For information on how to specify addresses, refer to
Flash Memory.
data from flash memory (hereafter called the 0xF0 command) is executed, BOOTROM automatically converts ad-
dresses. Therefore, as the address of flash memory, specify an address equivalent to that specified in MCU mode (if
FLSCR1<BAREA>="0"), namely, 0x1000 through 0xFFFF.
into a standby state and awaits the arrival of matching data 1 (0x86 or 0x30).
Figure 22-3 shows memory maps in serial PROM and MCU modes.
In serial PROM mode, the BOOTROM (mask ROM) is mapped to the 0x1000 through 0x17FF in the data area and
To write data to or erase data from flash memory by using the RAM loader command (hereafter called the 0x60
When the command to write data to flash memory (hereafter called the 0x30 command) or the command to erase
In serial PROM mode, the commands shown in Table 22-5 are used. After a reset is released, the TMP89FS60 goes
Memory Mapping
Operation Commands
0xFFFF
0x003F
0x0000
0x0040
0x1000
Data area
FLASH
RAM
SFR
If FLSCR1<BAREA>=”0”
(MCU mode)
0xFFFF
0x0000
0x1000
Figure 22-3 Memory Mapping
Code area
FLASH
Page 354
0xFFFF
0xFFFF
0x17FF
0x17FF
0x0000
0x003F
0x0040
0x1000
0x1800
0x0000
0x003F
0x0040
0x1000
0x1800
(2048 bytes)
Data area
(2048 bytes)
Data area
BOOTROM
BOOTROM
FLASH
FLASH
RAM
RAM
SFR
SFR
If FLSCR1<BAREA>=”1”
If serial PROM mode
(MCU mode)
0xFFFF
0xFFFF
0x17FF
0x1FFF
0x0000
0x1000
0x1800
0x0000
0x1000
0x2000
Code area
Code area
(4096 bytes)
(2048 bytes)
BOOTROM
BOOTROM
FLASH
FLASH
TMP89FS60