TMP89xy60UG/FG Toshiba, TMP89xy60UG/FG Datasheet - Page 396

• Manufacturer Part Number: TMP89xy60UG/FG
• Manufacturer: Toshiba

Specifications of TMP89xy60UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): M/F
• Rom Size: 32/60
• Ram Size: 3K
• Driver Led: 8
• Driver Lcd: -
• Spi/sio Channels: -
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 4
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: Y
• Number Of I/o Ports: 58
• Power Supply (v): 4.3 to 5.5

22.12
Security
RA003
Note 3: The data including the same consecutive data (three or more bytes) cannot be used as a password. (A password error
Note 4: In flash memory writing mode or RAM loader mode, the blank product receives the Intel Hex format data immediately after
Note 5: In executing the flash memory erase command, do not transmit a password string to a blank product.
occurs during password authentication. The TMP89FS60 does not transmit any data and goes into an idle state.)
receiving PCSA; it does not receive password strings. In this case, the subsequent processing is performed correctly
because the TMP89FS60 keeps ignoring incoming data until the start mark (0x3A ":") in the Intel Hex format is detected,
even if the external controller transmits the dummy password string. However, if the dummy password string contains
"0x3A", it is detected as the start mark erroneously, and the microcontroller enters the halt mode. If this causes a problem,
do not transmit the dummy password strings.
Page 380
TMP89FS60