TMP89xy60UG/FG Toshiba, TMP89xy60UG/FG Datasheet - Page 74

• Manufacturer Part Number: TMP89xy60UG/FG
• Manufacturer: Toshiba

Specifications of TMP89xy60UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): M/F
• Rom Size: 32/60
• Ram Size: 3K
• Driver Led: 8
• Driver Lcd: -
• Spi/sio Channels: -
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 4
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: Y
• Number Of I/o Ports: 58
• Power Supply (v): 4.3 to 5.5

3.5
Interrupt Sequence
RA003
Example :Save/store register using data transfer instructions
Example :Saving/restoring registers, using an instruction for transfer with data memory (with the main task using the
Figure 3-4 Saving/Restoring General-purpose Registers under Interrupt Processing
3.5.3.2
3.5.3.3
register bank BANK0)
PINTxx:
PINTxx:
purpose registers at a time. The register bank function saves (switches) the general-purpose registers by
executing a register bank manipulation instruction (such as LD RBS,1) at the beginning of an interrupt service
task. It is unnecessary to re-execute the register bank manipulation instruction at the end of the interrupt
service task because executing the RETI instruction makes a return automatically to the register bank that
was being used by the main task according to the content of the PSW.
To save only a specific register without nested interrupts, data transfer instructions are available.
In non-multiple interrupt handling, the register bank function can be used to save/restore the general-
Using data transfer instructions
Using a register bank to save/restore general-purpose registers
Note:Two register banks (BANK0 and BANK1) are available. Each bank consists of 8-bit general-purpose
registers (W, A, B, C, D, E, H, and L) and 16-bit general-purpose registers (IX and IY).
LD
Interrupt processing
LD
RETI
LD
Interrupt processing
RETI
Main task
(GSAVA), A
A, (GSAVA)
RBS, 1
Interrupt acceptance Interrupt
Interrupt return
Page 58
; Save A register
; Restore A register
; RETURN
; Switches to the register bank BANK1
; RETURN
(Makes a return automatically to BANK0 that
was being used by the main task when the
PSW is restored)
service task
Saving
registers
Restoring
registers
TMP89FS60