tmp19a61f10xbg TOSHIBA Semiconductor CORPORATION, tmp19a61f10xbg Datasheet - Page 523

• Manufacturer Part Number: tmp19a61f10xbg
• Description: 32-bit Tx System Risc Tx19 Family
• Manufacturer: TOSHIBA Semiconductor CORPORATION

in a condition the two bits are erased. The protection status of each block can be checked by
FLCS <BLPRO 3:0> to be described later. This status of the programming operation for
automatic protection bits can be checked by monitoring FLCS <RDY/BSY>. When the
automatic operation to erase protection bits is normally terminated, the two protection bits of
FLCS <BLPRO 3:0> selected for erasure are set to "0."
In any case, any new command sequence is not accepted while it is in an automatic
operation to erase protection bits. If it is desired to stop the operation, use the hardware
reset function. When the automatic operation to erase protection bits is normally terminated,
it returns to the read mode.
The FLCS <RDY/BSY> bit is "0" while in automatic operation and it turns
to "1" when the automatic operation is terminated.
TMP19A61 (rev1.0) 22-522
TMP19A61