DF2110BVTE10 Renesas Electronics America, DF2110BVTE10 Datasheet - Page 169

• Manufacturer Part Number: DF2110BVTE10
• Description: MCU 3V 64K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2110BVTE10

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 10MHz
• Connectivity: Host Interface (LPC), I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 82
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -
• Other names: HD64F2110BVTE10; HD64F2110BVTE10

LSMIE
HI12E
PB0DDR
Pin Function
Notes: 1. When bit LSMIE is set to 1 in HICR0, bits HI12E and PB0DDR should be cleared to 0.
7.12.5
Port B has an on-chip input pull-up MOS function that can be controlled by software. This input
pull-up MOS function can be specified as on or off on a bit-by-bit basis.
When a pin is designated as an on-chip peripheral module output pin, the input pull-up MOS is
always off.
Table 7.7 summarizes the input pull-up MOS states.
Table 7.7
Legend:
Off:
On/Off: On when the pin is in the input state, PBDDR = 0, and PBODR = 1; otherwise off.
Reset
Off
PB0/WUE0/LSMI
The pin function is switched as shown below according to the combination of the HI12E bit in
SYSCR2, the LSMIE bits in HICR0 of host interface (LPC), and the PB0DDR bit.
Input pull-up MOS is always off.
2. This pin can always be used as the WUE0 or LSMI input pin.
Port B Input Pull-Up MOS
Input Pull-Up MOS States (Port B)
Hardware
Standby Mode
Off
PB0 input pin
0
WUE0 input pin *
0
0
Software
Standby Mode
On/Off
PB0 output pin
Rev. 2.00 Mar 21, 2006 page 129 of 518
1
2
, LSMI input pin *
In Other
Operations
On/Off
LSMI output pin
2
Section 7 I/O Ports
REJ09B0299-0200
0 *
0 *
1
1
1