UPD78F1000GB-GAF-AX Renesas Electronics America, UPD78F1000GB-GAF-AX Datasheet - Page 354

• Manufacturer Part Number: UPD78F1000GB-GAF-AX
• Description: MCU 16BIT 78K0R/KX3-L 44-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3-Lr

Specifications of UPD78F1000GB-GAF-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0R/Kx3-L
(7) Peripheral enable registers 0, 1, 2 (PER0, PER1, PER2)
R01UH0106EJ0300 Rev.3.00
Oct 01, 2010
These registers are used to enable or disable supplying the clock to the peripheral hardware. Clock supply to the
hardware that is not used is also stopped so as to decrease the power consumption and noise.
The 78K0R/KC3-L, 78K0R/KD3-L, and 78K0R/KE3-L include the PER0, PER1, and PER2 registers.
78K0R/KF3-L and 78K0R/KG3-L, however, only include the PER0 and PER1
incorporated in the PER0 register differ depending on the product.
To use the peripheral functions below, which are controlled by this register, set (1) the bit corresponding to each
function before specifying the initial settings of the peripheral functions.
The PER0, PER1, and PER2 registers can be set by a 1-bit or 8-bit memory manipulation instruction.
Reset signal generation clears these registers to 00H.
Notes 1. PER1 register is only mounted in the
• Real-time counter
• A/D converter
• Serial interface IICA
• Serial array unit 0
• Serial array unit 1
• Serial array unit 2
• Timer array unit 0
• Timer array unit 1
• Comparators/programmable gain amplifiers
4. 78K0R/KF3-L, 78K0R/KG3-L only.
5. 78K0R/KC3-L, 78K0R/KD3-L, 78K0R/KE3-L only.
2. This is not mounted onto 40-pin product of the 78K0R/KC3-L.
3. This is not mounted onto 44-pin and 48-pin products of the 78K0R/KC3-L.
Note 2
Note 1
Note 4
Note 4
Note 3
μ
Note 5
PD78F1027 to 78F1030.
CHAPTER 7 CLOCK GENERATOR
Note 1
registers. Note also that the bits
The
354