UPD78F1000GB-GAF-AX Renesas Electronics America, UPD78F1000GB-GAF-AX Datasheet - Page 99

• Manufacturer Part Number: UPD78F1000GB-GAF-AX
• Description: MCU 16BIT 78K0R/KX3-L 44-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3-Lr

Specifications of UPD78F1000GB-GAF-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0R/Kx3-L
3.2 Description of Pin Functions
3.2.1 P00 to P06 (port 0)
port input mode register 0 (PIM0).
1-bit units, using port output mode register 0 (POM0).
Notes 1. TI00 and TO00 are shared with P53 and P52, respectively, in the 78K0R/KF3-L.
(1) Port mode
(2) Control mode
R01UH0106EJ0300 Rev.3.00
Oct 01, 2010
P00/TI00
P01/TO00
P02/SO10/TxD1
P03/SI10/RxD1/SDA10
P04/SCK10/SCL10
P05/TI05/TO05
P06/TI06/TO06
Remark The pins mounted depend on the product. See 1.4 Pin Configuration (Top View) and 3.1 Pin Function
P00 to P06 function as an I/O port. These pins also function as timer I/O, serial interface data I/O, and clock I/O.
Input to the P03 and P04 pins can be specified through a normal input buffer or a TTL input buffer in 1-bit units, using
Output from the P02 to P04 pins can be specified as normal CMOS output or N-ch open-drain output (V
The following operation modes can be specified in 1-bit units.
P00 to P06 function as an I/O port. P00 to P06 can be set to input or output port in 1-bit units using port mode
register 0 (PM0). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 0 (PU0).
P00 to P04 function as timer I/O, serial interface data I/O, and clock I/O.
(a) TI00, TI05, and TI06
(b) TO00, TO05, and TO06
(c) SI10
(d) SO10
2. TI05/TO05 and TI06/TO06 are shared with P46 and P131, respectively, in the 78K0R/KG3-L.
There are the pins for inputting an external count clock/capture trigger to 16-bit timers 00, 05, and 06.
These are the timer output pins of 16-bit timers 00, 05, and 06.
This is a serial data input pin of serial interface CSI10.
This is a serial data output pin of serial interface CSI10.
List.
(
μ
PD78F10xx: xx = 10, 11, 12,
78K0R/KF3-L
27, 28)
−
−
Note 1
Note 1
√
√
√
√
√
CHAPTER 3 PIN FUNCTIONS (78K0R/KF3-L, 78K0R/KG3-L)
(
μ
PD78F10xx: xx = 13, 14,
78K0R/KG3-L
P05
P06
29, 30)
√
√
√
√
√
Note 2
Note 2
DD
tolerance) in
99