UPD78F1000GB-GAF-AX Renesas Electronics America, UPD78F1000GB-GAF-AX Datasheet - Page 430

• Manufacturer Part Number: UPD78F1000GB-GAF-AX
• Description: MCU 16BIT 78K0R/KX3-L 44-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3-Lr

Specifications of UPD78F1000GB-GAF-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0R/Kx3-L
R01UH0106EJ0300 Rev.3.00
Oct 01, 2010
(15) Port mode registers 0, 1, 3 to 6, 13, 14 (PM0, PM1, PM3 to PM6, PM13, PM14)
These registers set input/output of ports 0, 1, 3 to 6, 13, 14 in 1-bit units.
The port pins that are shared with the timer I/O pins differ depending on the product. When using the timer array
unit, set the following port mode registers according to the product used.
78K0R/KC3-L: PM1, PM5
78K0R/KD3-L: PM1, PM5
78K0R/KE3-L: PM0, PM1, PM5
78K0R/KF3-L: PM0, PM1, PM3-PM6
78K0R/KG3-L: PM0, PM1, PM3, PM4, PM6, PM13, PM14
When using the ports (such as P01/TO00 and P10/TO02/TI02) to be shared with the timer output pin for timer
output, set the port mode register (PMxx) bit and port register (Pxx) bit corresponding to each port to 0.
Example: When using P10/TO02/TI02 for timer output
When using the ports (such as P00/TI00 and P10/TO02/TI02) to be shared with the timer output pin for timer input,
set the port mode register (PMxx) bit corresponding to each port to 1. At this time, the port register (Pxx) bit may
be 0 or 1.
Example: When using P10/TO02/TI02 for timer input
The PM0, PM1, PM3 to PM6, PM13, PM14 registers can be set by a 1-bit or 8-bit memory manipulation
instruction.
Reset signal generation sets these registers to FFH.
Set the PM10 bit of port mode register 1 to 0.
Set the P10 bit of port register 1 to 0.
Set the PM10 bit of port mode register 1 to 1.
Set the P10 bit of port register 1 to 0 or 1.
CHAPTER 8 TIMER ARRAY UNIT
430