HD6417712BPV Renesas Electronics America, HD6417712BPV Datasheet - Page 368

• Manufacturer Part Number: HD6417712BPV
• Description: MPU 1.5/3.3V 0K PB-FREE 256-BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH Ethernetr

Specifications of HD6417712BPV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, Ethernet, FIFO, SCI, SIO
• Peripherals: DMA, POR, WDT
• Number Of I /o: 24
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

Section 11 On-Chip Oscillation Circuits
11.7
The WDT has the following two registers that select the clock, switch the timer mode, and
perform other functions. For details on register addresses and register access size, refer to section
23, List of Registers.
• Watchdog timer counter (WTCNT)
• Watchdog timer control/status register (WTCSR)
11.7.1
WTCNT is an 8-bit readable/writable counter. WTCNT increments on the selected clock. When
an overflow occurs, it generates a reset in watchdog timer mode and an interrupt in interval time
mode. WTCNT is initialized to H'00 only by a power-on reset through the RESETP pin. Use a
word access to write to WTCNT, with H'5A in the upper byte. Use a byte access to read WTCNT.
Note: WTCNT differs from other registers in that it is more difficult to write to. See section
11.7.2
WTCSR is an 8-bit readable/writable register composed of bits to select the clock used for the
count, bits to select the timer mode, and overflow flags.
WTCSR is initialized to H'00 only by a power-on reset through the RESETP pin. When a WDT
overflow causes an internal reset, WTCSR retains its value. When used to count the clock settling
time for canceling a standby, it retains its value after counter overflow.
Use a word access to write to WTCSR, with H'A5 in the upper byte. Use a byte access to read
WTCSR.
Note: WTCSR differs from other registers in that it is more difficult to write to. See section
Rev. 1.00 Dec. 27, 2005 Page 324 of 932
REJ09B0269-0100
11.7.3, Notes on Register Access, for details.
11.7.3, Notes on Register Access, for details.
Register Descriptions of WDT
Watchdog Timer Counter (WTCNT)
Watchdog Timer Control/Status Register (WTCSR)