DS3181 Maxim Integrated Products, DS3181 Datasheet - Page 333

• Manufacturer Part Number: DS3181
• Description: Network Controller & Processor ICs DS3-E3 ATM-Packet PH Y with Built-in Line
• Manufacturer: Maxim Integrated Products

Specifications of DS3181

• Product: Framer
• Number Of Transceivers: 1
• Data Rate: 44.736 Mbps
• Supply Voltage (max): 3.465 V
• Supply Voltage (min): 3.135 V
• Supply Current (max): 280 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Package / Case: TEBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Register Name:
Register Description:
Register Address:
Bit #
Name
Bit #
Name
Bit 4: Transmit FIFO Aborted Transfer Latched (TFATL) – This bit is set when a transfer is aborted. An aborted
transfer does not occur in UTOPIA mode. In POS-PHY mode, an aborted transfer occurs when a packet error (a
transfer with TERR and TEOP asserted) occurs. An aborted transfer is stored in the transmit FIFO with an abort
indication.
Bit 3: Transmit FIFO Short Transfer Latched (TFSTL) – This bit is set when a "short transfer" is received. In
UTOPIA mode, a "short transfer" occurs when a start of cell (a transfer with TSOC asserted) occurs before the
previous cell transfer has been completed. In POS-PHY mode, a "short transfer" occurs when a start of packet (a
transfer with TSOP asserted) occurs after a previous start of packet, but before an end of packet (a transfer with
TEOP asserted). In UTOPIA mode, the short transfer data is discarded. In POS-PHY mode, a short transfer is
stored in the transmit FIFO with an abort indication.
Bit 2: Transmit FIFO Invalid Transfer Latched (TFITL) – This bit is set when an "invalid transfer" is initiated. In
UTOPIA mode, an "invalid transfer" occurs when additional cell data is transferred after the last transfer of a cell
and before a transfer with TSOC asserted. In POS-PHY mode, an "invalid transfer" occurs when packet data is
transferred after an end of packet, but before a start of packet (this includes another end of packet transfer). The
invalid transfer data is discarded.
Bit 1: Transmit FIFO Underflow Latched (TFUL) – This bit is set when a Transmit FIFO underflow condition
occurs. An underflow condition results in a loss of data.
Bit 0: Transmit FIFO Overflow Latched (TFOL) – This bit is set when a Transmit FIFO overflow condition occurs.
An overflow condition results in a loss of data.
15
—
—
7
14
—
—
6
FF.TSRL
FIFO Transmit Status Register Latched Register
(1,3,5,7)88h
13
—
—
5
TFATL
12
—
4
333
TFSTL
11
—
3
TFITL
10
—
2
TFUL
—
9
1
TFOL
—
8
0