UPD78F1233GB-GAH-AX Renesas Electronics America, UPD78F1233GB-GAH-AX Datasheet - Page 314

• Manufacturer Part Number: UPD78F1233GB-GAH-AX
• Description: MCU 16BIT 78K0R/LX3 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Ix3r

Specifications of UPD78F1233GB-GAH-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 50
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

312
(3) Operation of TOn pin in slave channel output mode (TOMn = 1)
(b) When operation starts with slave channel output mode (TOMn = 1) setting (PWM output)
(a) When TOL0 register setting has been changed during timer operation
Remarks 1. Set:
Remarks 1. Set:
When slave channel output mode (TOMn = 1), the active level is determined by TOLn setting.
When the TOL0 register setting has been changed during timer operation, the setting becomes valid at the
generation timing of Ton pin change condition. Rewriting TOL0 register does not change the output level of
TOn pin.
The operation when TOMn is set to 1 and the value of the TOL0 register is changed while the timer is
operating (TEn = 1) is shown below.
Figure 6-29. Operation when TOL0 Register Has Been Changed during Timer Operation
2. n = 00 to 11 (n = 02 to 07 and 11 for timer output pin (TOn) of 78K0R/IB3)
2. n = 00 to 11 (n = 02 to 07 and 11 for timer output pin (TOn) of 78K0R/IB3)
Output reset signal
Output set signal
(Internal signal)
(Internal signal)
Reset: The output signal of TOn pin changes from active level to inactive level.
Reset: The output signal of TOn pin changes from active level to inactive level.
Default level, TOLn setting
Figure 6-28. TOn Pin Output Status at PWM Output (TOMn = 1)
TOn = 0, TOLn = 0
TOn = 1, TOLn = 0
TOn = 0, TOLn = 1
TOn = 1, TOLn = 1
TOn pin
The output signal of TOn pin changes from inactive level to active level.
The output signal of TOn pin changes from inactive level to active level.
TOLn
(Active high)
(Active high)
(Active low)
(Active low)
CHAPTER 6 TIMER ARRAY UNIT TAUS
TOEn
Port output is enabled
User’s Manual U19678EJ1V1UD
Dependent on TOn setting
Hi-Z
Hi-Z
Hi-Z
Hi-Z
TOn does not change
Set
No change
Reset
Set/reset signals are inverted
TOn pin transition
Dependent on TOLn setting
Set
Reset
Set