HD64F2318VTE25 Renesas Electronics America, HD64F2318VTE25 Datasheet - Page 565

• Manufacturer Part Number: HD64F2318VTE25
• Description: IC H8S MCU FLASH 256K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of HD64F2318VTE25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 71
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

14.1
The chip incorporates a successive-approximations type 10-bit A/D converter that allows up to
eight analog input channels to be selected.
14.1.1
A/D converter features are listed below
• 10-bit resolution
• Eight input channels
• Settable analog conversion voltage range
• High-speed conversion
• Choice of single mode or scan mode
• Four data registers
• Sample and hold function
• Three kinds of conversion start
• A/D conversion end interrupt generation
• Module stop mode can be set
⎯ Conversion of analog voltages with the reference voltage pin (V
⎯ Minimum conversion time: 6.7 μs per channel (at 20-MHz operation)
⎯ Single mode: Single-channel A/D conversion
⎯ Scan mode:
⎯ Conversion results are held in a 16-bit data register for each channel
⎯ Choice of software or timer conversion start trigger (TPU or 8-bit timer), or ADTRG pin
⎯ A/D conversion end interrupt (ADI) request can be generated at the end of A/D conversion
⎯ The data transfer controller (DTC) can be activated for data transfer by an interrupt
⎯ As the initial setting, A/D converter operation is halted. Register access is enabled by
voltage
exiting module stop mode
Overview
Features
(8 Analog Input Channel Version)
Continuous A/D conversion on 1 to 4 channels
Section 14 A/D Converter
Section 14 A/D Converter (8 Analog Input Channel Version)
Rev.7.00 Feb. 14, 2007 page 531 of 1108
ref
) as the analog reference
REJ09B0089-0700