HD64F2318VTE25 Renesas Electronics America, HD64F2318VTE25 Datasheet - Page 581

• Manufacturer Part Number: HD64F2318VTE25
• Description: IC H8S MCU FLASH 256K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of HD64F2318VTE25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 71
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

14.5
The A/D converter generates an A/D conversion end interrupt (ADI) at the end of A/D conversion.
ADI interrupt requests can be enabled or disabled by means of the ADIE bit in ADCSR.
The DTC can be activated by an ADI interrupt. Having the converted data read by the DTC in
response to an ADI interrupt enables continuous conversion to be achieved without imposing a
load on software.
The A/D converter interrupt source is shown in table 14.6.
Table 14.6 A/D Converter Interrupt Source
Interrupt Source
ADI
φ
ADTRG
ADST
Internal trigger signal
Interrupts
Description
Interrupt due to end of conversion
Figure 14.6 External Trigger Input Timing
Section 14 A/D Converter (8 Analog Input Channel Version)
Rev.7.00 Feb. 14, 2007 page 547 of 1108
A/D conversion
DTC Activation
Possible
REJ09B0089-0700