HD64F2318VTE25 Renesas Electronics America, HD64F2318VTE25 Datasheet - Page 574

• Manufacturer Part Number: HD64F2318VTE25
• Description: IC H8S MCU FLASH 256K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of HD64F2318VTE25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 71
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 14 A/D Converter (8 Analog Input Channel Version)
14.3
ADDRA to ADDRD are 16-bit registers, and the data bus to the bus master is 8 bits wide.
Therefore, in accesses by the bus master, the upper byte is accessed directly, but the lower byte is
accessed via a temporary register (TEMP).
A data read from ADDR is performed as follows. When the upper byte is read, the upper byte
value is transferred to the CPU and the lower byte value is transferred to TEMP. Next, when the
lower byte is read, the TEMP contents are transferred to the CPU.
When reading ADDR, always read the upper byte before the lower byte. It is possible to read only
the upper byte, but if only the lower byte is read, incorrect data may be obtained.
Figure 14.2 shows the data flow for ADDR access.
Rev.7.00 Feb. 14, 2007 page 540 of 1108
REJ09B0089-0700
Interface to Bus Master
Bus master
(H'AA)
Bus master
(H'40)
Lower byte read
Upper byte read
Figure 14.2 ADDR Access Operation (Reading H'AA40)
Bus interface
Bus interface
ADDRnH
ADDRnH
(H'AA)
(H'AA)
ADDRnL
ADDRnL
(H'40)
(H'40)
TEMP
(H'40)
TEMP
(H'40)
Module data bus
Module data bus
(n = A to D)
(n = A to D)