HD64F2318VTE25 Renesas Electronics America, HD64F2318VTE25 Datasheet - Page 809

• Manufacturer Part Number: HD64F2318VTE25
• Description: IC H8S MCU FLASH 256K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of HD64F2318VTE25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 71
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Error
Response
• Error response: H'C8 (1 byte): Error response to erasing selection
• ERROR: (1 byte): Error code
(2) Block Erasure
The boot program will erase the contents of the specified block.
Command
• Command, H'58, (1 byte): Erasure
• Size (1 byte): The number of bytes that represents the erasure block number
• Block Number (1 byte): Number of the block to be erased
• SUM (1 byte): Checksum
Response
• Response, H'06, (1 byte): Response to Erasure
Error
Response
• Error Response, H'D8, (1 byte): Error code
• ERROR: (1 byte): Error code
On receiving block number H'FF, the boot program will stop erasure and wait for a selection
command.
Command
• Command, H'58, (1 byte): Erasure
• Size, (1 byte): The number of bytes that represents the block number
This is fixed to 1.
After erasure has been completed, the boot program will return ACK.
This is fixed to 1.
H'54: Selection processing error (transfer error occurs and processing is not completed)
H'11: Sum check error
H'29: Block number error
H'51: Erasure error
H'C8
H'58
H'06
H'D8
H'58
Block number is incorrect.
An error has occurred during erasure.
ERROR
Size
ERROR
Size
Block Number
Block Number
SUM
SUM
Rev.7.00 Feb. 14, 2007 page 775 of 1108
REJ09B0089-0700
Section 17 ROM