HD64F2318VTE25 Renesas Electronics America, HD64F2318VTE25 Datasheet - Page 747

• Manufacturer Part Number: HD64F2318VTE25
• Description: IC H8S MCU FLASH 256K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of HD64F2318VTE25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 71
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Bit 4—Flash Key Register Error Detect (FK): Returns the check result of the value of FKEY
before the start of the programming processing.
Bit 4
FK
0
1
Bit 3—Reserved: Returns 0.
Bit 2—Write Data Address Detect (WD): When flash memory area is specified as the start
address of the storage destination of the program data, an error occurs.
Bit 2
WD
0
1
Bit 1—Write Address Error Detect (WA): When the following area is specified as the start
address of the programming destination, an error occurs.
1. If the start address is outside the flash memory area
2. If the specified address is not a 128-byte boundary (A6 to A0 are not 0)
Bit 1
WA
0
1
Bit 0—Success/Fail (SF): Indicates whether the program processing is ended normally or not.
Bit 0
SF
0
1
Description
FKEY setting is normal (FKEY = H'5A)
FKEY setting is error (FKEY = value other than H'5A)
Description
Setting of write data address is normal
Setting of write data address is abnormal
Description
Setting of programming destination address is normal
Setting of programming destination address is abnormal
Description
Programming is ended normally (no error)
Programming is ended abnormally (error occurs)
Rev.7.00 Feb. 14, 2007 page 713 of 1108
REJ09B0089-0700
Section 17 ROM