BMSKTOPASA900(DCE) Toshiba, BMSKTOPASA900(DCE) Datasheet - Page 506

• Manufacturer Part Number: BMSKTOPASA900(DCE)
• Description: KIT STARTER TMPA900 USB JTAG
• Manufacturer: Toshiba
• Series: TOPASr
• Type: MCUr

Specifications of BMSKTOPASA900(DCE)

• Contents: Evaluation Board, Cable(s), Software and Documentation
• For Use With/related Products: TMPA900CMXBG
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

b. <mr_reset>
c.
d. <mr_enable>
e. <mw_reset>
Initializes the Master Read transfer block of UDC2AB. However, as the FIFOs of
endpoints are not initialized, you need to access the Command register of UDC2 to
initialize the corresponding endpoint separately from this reset.
This reset should be used after stopping the Master operation.
This bit will be automatically cleared to 0 after being set to 1. Subsequent Master Read
transfers should not be made until it is cleared.
0y0: No operation
0y1: Reset
<mr_abort>
Controls Master Read transfers. Master Read operations can be stopped by setting 1 to
this bit.
When aborted during transfers, transfer of buffers for Master Read to UDC2 is
interrupted and the mr_enable bit is cleared, stopping the Master Read transfer.
Aborting completes when the mr_enable bit is disabled to 0 after setting this bit to 1.
0y0: No operation
0y1: Abort
Controls Master Read transfers. Enabling should be made when setting the transfer
address is completed. It will be automatically disabled as the master transfer finishes.
Since Master Read operations cannot be disabled with this register, use the mr_abort bit
if the Master Read transfer should be stopped.
0y0: Disable
0y1: Enable
Initializes the Master Write transfer block. However, as the FIFOs of endpoints are not
initialized, you need to access the Command register of UDC2 to initialize the
corresponding endpoint separately from this reset.
This reset should be used after stopping the Master operation.
This bit will be automatically cleared to 0 after being set to 1. Subsequent Master Write
transfers should not be made until it is cleared.
0y0: No operation
0y1: Reset
TENTATIVE
TMPA900CM- 505
TMPA900CM
2009-10-14