BMSKTOPASA900(DCE) Toshiba, BMSKTOPASA900(DCE) Datasheet - Page 773

KIT STARTER TMPA900 USB JTAG

BMSKTOPASA900(DCE)

Manufacturer Part Number
BMSKTOPASA900(DCE)
Description
KIT STARTER TMPA900 USB JTAG
Manufacturer
Toshiba
Series
TOPASr
Type
MCUr
Datasheets

Specifications of BMSKTOPASA900(DCE)

Contents
Evaluation Board, Cable(s), Software and Documentation
For Use With/related Products
TMPA900CMXBG
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
h. <CHSYPH>
i. <CHBKPH>
j. <CPCKPH>
k. <CFOVF>
l. <CFDEF>
m. <CFPCLR>
n. <CINTSEL>
Selects the positive/negative logic of the horizontal sync signal CMSHSY.
0y0: Negative logic (Negative)
0y1: Positive logic (Positive)
Selects the positive/negative logic of the valid data detection signal CMSHBK.
0y0: Negative logic (Negative): Understands data to be valid when the signal is “L”.
0y1: Positive logic (Positive): Understands data to be valid when the signal is “H”.
Selects the rising/falling of the data capture edge in the clock CMSPCK signal that latches
data.
0y0: Rising edge
0y1: Falling edge
This is the flag showing that the data accumulated in the FIFO is updated before read.
This bit is not cleared automatically. Clear it by writing 0.
During READ
0y0: No overwrite
0y1: Overwrite occurred
This is the flag showing that the FIFO contains valid data. This bit is read-only and
cannot be cleared by an instruction. Until all data in the FIFO is read or <CFPCLR> = 0 is
used to reset internally, 1 is retained.
0y0: No valid data
0y1: With valid data
If data is input from internal register, writing 0y1 clears the FIFO read/write pointer. It is
set to 0 when it is read. Writing is invalid if the data is input from external pin of CMOS
image sensor. When you clear this bit, use <CSRST> bit.
Selects the generation timing of the external signal sync interrupt which has two types.
0y0: Generates at CMSVSY rising edge (<CVSYPH>=0: when set to NEGATIVE) or
0y1: Generates at CMSHBK rising edge (<CHBKPH> = 0: when set to NEGATIVE) or
generates at CMSVSY falling edge (<CVSYPH> = 1: when set to POSITIVE)
generates at CMSHBK falling edge (<CHBKPH > = 1: when set to POSITIVE)
TENTATIVE
TMPA900CM- 772
During WRITE
0y0: Flag clear
0y1: Invalid
TMPA900CM
2009-10-14

Related parts for BMSKTOPASA900(DCE)