DF61654N50FTV Renesas Electronics America, DF61654N50FTV Datasheet - Page 129

• Manufacturer Part Number: DF61654N50FTV
• Description: IC H8SX/1654 MCU FLASH 120TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8SX/1600r

Specifications of DF61654N50FTV

• Core Processor: H8SX
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, IrDA, SCI, SmartCard, USB
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 75
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 120-TQFP, 120-VQFP
• For Use With: HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)3DK1657 - DEV EVAL KIT FOR H8SX/1657
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

4.4
Traces are enabled in interrupt control mode 2. Trace mode is not activated in interrupt control
mode 0, irrespective of the state of the T bit. Before changing interrupt control modes, the T bit
must be cleared. For details on interrupt control modes, see section 5, Interrupt Controller.
If the T bit in EXR is set to 1, trace mode is activated. In trace mode, a trace exception occurs on
completion of each instruction. Trace mode is not affected by interrupt masking by CCR. Table
4.4 shows the state of CCR and EXR after execution of trace exception handling. Trace mode is
canceled by clearing the T bit in EXR to 0 during the trace exception handling. However, the T bit
saved on the stack retains its value of 1, and when control is returned from the trace exception
handling routine by the RTE instruction, trace mode resumes. Trace exception handling is not
carried out after execution of the RTE instruction.
Interrupts are accepted even within the trace exception handling routine.
Table 4.4
[Legend]
1:
0:
:
Interrupt Control Mode
0
2
Set to 1
Cleared to 0
Retains the previous value.
Traces
Status of CCR and EXR after Trace Exception Handling
I
Trace exception handling cannot be used.
1
CCR
UI

Rev.1.00 Sep. 08, 2005 Page 79 of 966
I2 to I0

Section 4 Exception Handling
EXR
REJ09B0219-0100
T
0