H8S-2350 RENESAS [Renesas Technology Corp], H8S-2350 Datasheet - Page 590

• Manufacturer Part Number: H8S-2350
• Description: 16-Bit Single-Chip Microcomputer
• Manufacturer: RENESAS [Renesas Technology Corp]

Section 13 Serial Communication Interface (SCI)
Bit 5—Transmit Enable (TE): Enables or disables the start of serial transmission by the SCI.
Notes: 1. The TDRE flag in SSR is fixed at 1.
Bit 4—Receive Enable (RE): Enables or disables the start of serial reception by the SCI.
Notes: 1. Clearing the RE bit to 0 does not affect the RDRF, FER, PER, and ORER flags, which
Rev. 3.00 Sep 15, 2006 page 556 of 988
REJ09B0330-0300
Bit 5
TE
0
1
Bit 4
RE
0
1
2. In this state, serial transmission is started when transmit data is written to TDR and the
2. Serial reception is started in this state when a start bit is detected in asynchronous
TDRE flag in SSR is cleared to 0.
SMR setting must be performed to decide the transfer format before setting the TE bit
to 1.
retain their states.
mode or serial clock input is detected in clocked synchronous mode.
SMR setting must be performed to decide the transfer format before setting the RE bit
to 1.
Description
Transmission disabled *
Transmission enabled *
Description
Reception disabled *
Reception enabled *
2
1
2
1
(Initial value)
(Initial value)