H8S-2350 RENESAS [Renesas Technology Corp], H8S-2350 Datasheet - Page 701

• Manufacturer Part Number: H8S-2350
• Description: 16-Bit Single-Chip Microcomputer
• Manufacturer: RENESAS [Renesas Technology Corp]

Bit 6—D/A Output Enable 0 (DAOE0): Controls D/A conversion and analog output for channel
0.
Bit 5—D/A Enable (DAE): The DAOE0 and DAOE1 bits both control D/A conversion. When
the DAE bit is cleared to 0, the channel 0 and 1 D/A conversions are controlled independently.
When the DAE bit is set to 1, the channel 0 and 1 D/A conversions are controlled together.
Output of resultant conversions is always controlled independently by the DAOE0 and DAOE1
bits.
Legend: *: Don’t care
If the H8S/2350 Group enters software standby mode when D/A conversion is enabled, the D/A
output is held and the analog power current is the same as during D/A conversion. When it is
necessary to reduce the analog power current in software standby mode, clear both the DAOE0
and DAOE1 bits to 0 to disable D/A output.
Bits 4 to 0—Reserved: Read-only bits, always read as 1.
Bit 6
DAOE0
0
1
Bit 7
DAOE1
0
1
Description
Analog output DA0 is disabled
Channel 0 D/A conversion is enabled; analog output DA0 is enabled
Bit 6
DAOE0
0
1
0
1
Bit 5
DAE
*
0
1
0
1
*
Description
Channel 0 and 1 D/A conversions disabled
Channel 0 D/A conversion enabled
Channel 1 D/A conversion disabled
Channel 0 and 1 D/A conversions enabled
Channel 0 D/A conversion disabled
Channel 1 D/A conversion enabled
Channel 0 and 1 D/A conversions enabled
Channel 0 and 1 D/A conversions enabled
Rev. 3.00 Sep 15, 2006 page 667 of 988
Section 16 D/A Converter
REJ09B0330-0300
(Initial value)