R0K572030S000BE Renesas Electronics America, R0K572030S000BE Datasheet - Page 1131

• Manufacturer Part Number: R0K572030S000BE
• Description: KIT DEV FOR SH7203
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K572030S000BE

• Contents: CPU Board, LCD Module, E10A-Lite Emulator, Cable, QuickStart Guide and CD-ROM
• Silicon Manufacturer: Renesas
• Kit Contents: Board
• Silicon Family Name: SH7203
• Silicon Core Number: R5S72030W200FP
• Tool / Board Applications: General Purpose MCU, MPU, DSP, DSC
• Mcu Supported Families: SH7203
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7203
• Lead Free Status / Rohs Status: Compliant

• Function that automatically clears the buffer memory after the data for the pipe specified at the
• NAK setting function for response PID generated by end of transfer (SHTNAK)
23.2
Table 23.1 shows the pin configuration and pin functions of the USB.
When this module is not in use, handle the pins as follows.
• Be sure to apply power to the power-supply pins
• Connect DP, DM, and VBUS to USBDPV
• Connect REFRIN to USBAPV
• For USB_X1 and USB_X2, see section 4.3, Clock Operating Modes
Table 23.1 USB Pin Configuration
Category
USB bus
interface
VBUS
monitor
input
Reference
resistance
DnFIFO (n = 0 or 1) port has been read (DCLRM)
Input/Output Pins
Name
USB D+ data
USB D- data
VBUS input
Reference input
Pin Name
DP
DM
VBUS
REFRIN
CC
through a 5.6 kΩ ± 20 % resistor
SS
I/O
I/O
I/O
Input
Input
Function
D+ I/O of the USB on-chip transceiver
This pin should be connected to the D+ pin
of the USB bus.
D− I/O of the USB on-chip transceiver
This pin should be connected to the D- pin of
the USB bus.
USB cable connection monitor pin
This pin should be connected directly to the
Vbus of the USB bus. Whether the Vbus is
connected or disconnected can be detected.
If this pin is not connected with the Vbus of
the USB bus, it should be supplied with 5 V.
It should be supplied with 5 V also when the
host controller function is selected.
Note: Vbus is not provided to the connected
Reference resistor connection pin
This pin should be connected to USBAPV
through a 5.6 kΩ ±1% resistor.
Section 23 USB 2.0 Host/Function Module (USB)
Rev. 3.00 Sep. 28, 2009 Page 1099 of 1650
device.
REJ09B0313-0300
SS