R0K572030S000BE Renesas Electronics America, R0K572030S000BE Datasheet - Page 791

• Manufacturer Part Number: R0K572030S000BE
• Description: KIT DEV FOR SH7203
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K572030S000BE

• Contents: CPU Board, LCD Module, E10A-Lite Emulator, Cable, QuickStart Guide and CD-ROM
• Silicon Manufacturer: Renesas
• Kit Contents: Board
• Silicon Family Name: SH7203
• Silicon Core Number: R5S72030W200FP
• Tool / Board Applications: General Purpose MCU, MPU, DSP, DSC
• Mcu Supported Families: SH7203
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7203
• Lead Free Status / Rohs Status: Compliant

Bit
5
4
3
2
Bit Name
CTSIO
CTSDT
SCKIO
SCKDT
Initial
Value
0
1
0
0
R/W
R/W
R/W
R/W
R/W
Description
CTS Port Input/Output
Indicates input or output of the serial port CTS pin.
When the CTS pin is actually used as a port outputting
the CTSDT bit value, the MCE bit in SCFCR should be
cleared to 0.
0: CTSDT bit value not output to CTS pin
1: CTSDT bit value output to CTS pin
CTS Port Data
Indicates the input/output data of the serial port CTS
pin. Input/output is specified by the CTSIO bit. For
output, the CTSDT bit value is output to the CTS pin.
The CTS pin status is read from the CTSDT bit
regardless of the CTSIO bit setting. However, CTS
input/output must be set in the PFC.
0: Input/output data is low level
1: Input/output data is high level
SCK Port Input/Output
Indicates input or output of the serial port SCK pin.
When the SCK pin is actually used as a port outputting
the SCKDT bit value, the CKE[1:0] bits in SCSCR
should be cleared to 0.
0: SCKDT bit value not output to SCK pin
1: SCKDT bit value output to SCK pin
SCK Port Data
Indicates the input/output data of the serial port SCK
pin. Input/output is specified by the SCKIO bit. For
output, the SCKDT bit value is output to the SCK pin.
The SCK pin status is read from the SCKDT bit
regardless of the SCKIO bit setting. However, SCK
input/output must be set in the PFC.
0: Input/output data is low level
1: Input/output data is high level
Section 15 Serial Communication Interface with FIFO (SCIF)
Rev. 3.00 Sep. 28, 2009 Page 759 of 1650
REJ09B0313-0300