MC912D60CCPVE Freescale Semiconductor, MC912D60CCPVE Datasheet - Page 336

• Manufacturer Part Number: MC912D60CCPVE
• Description: IC MCU 16BIT 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MC912D60CCPVE

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: CAN, MI Bus, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Processor Series: HC912D
• Core: HC12
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: CAN, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 86
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MSCAN Controller
Technical Data
336
RWRNIF — Receiver Warning Interrupt Flag
TWRNIF — Transmitter Warning Interrupt Flag
RERRIF — Receiver Error Passive Interrupt Flag
TERRIF — Transmitter Error Passive Interrupt Flag
1. Condition to set the flag: RWRNIF = (96 ≤ REC ≤ 127) & RERRIF & TERRIF & BOFFIF
2. Condition to set the flag: TWRNIF = (96 ≤ TEC ≤ 127) & RERRIF & TERRIF & BOFFIF
3. Condition to set the flag: RERRIF = (128 ≤ REC ≤ 255) & BOFFIF
4. Condition to set the flag: TERRIF = (128 ≤ TEC ≤ 255) & BOFFIF
This flag is set when the msCAN12 goes into warning status due to
the Receive Error counter (REC) exceeding 96 and neither one of the
Error interrupt flags or the Bus-Off interrupt flag is set
masked, an Error interrupt is pending while this flag is set.
This bit will be set when the msCAN12 goes into warning status due
to the Transmit Error counter (TEC) exceeding 96 and neither one of
the Error interrupt flags or the Bus-Off interrupt flag is set
masked, an Error interrupt is pending while this flag is set.
This flag is set when the msCAN12 goes into error passive status due
to the Receive Error counter (REC) exceeding 127 and the Bus-Off
interrupt flag is not set
while this flag is set.
This flag is set when the msCAN12 goes into error passive status due
to the Transmit Error counter (TEC) exceeding 127 and the Bus-Off
interrupt flag is not set
while this flag is set.
0 = No receiver warning status has been reached.
1 = msCAN12 went into receiver warning status.
0 = No transmitter warning status has been reached.
1 = msCAN12 went into transmitter warning status.
0 = No receiver error passive status has been reached.
1 = msCAN12 went into receiver error passive status.
0 = No transmitter error passive status has been reached.
1 = msCAN12 went into transmitter error passive status.
MSCAN Controller
(3)
(4)
. If not masked, an Error interrupt is pending
. If not masked, an Error interrupt is pending
MC68HC912D60A — Rev. 3.1
Freescale Semiconductor
(1)
. If not
(2)
. If not