MC912D60CCPVE Freescale Semiconductor, MC912D60CCPVE Datasheet - Page 357

• Manufacturer Part Number: MC912D60CCPVE
• Description: IC MCU 16BIT 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MC912D60CCPVE

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: CAN, MI Bus, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Processor Series: HC912D
• Core: HC12
• Data Bus Width: 16 bit
• Data Ram Size: 2 KB
• Interface Type: CAN, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 86
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

18.7 General Purpose Digital Input Port Operation
MC68HC912D60A — Rev. 3.1
Freescale Semiconductor
The ATD module reset function places the module back into an
initialized state. If the module is performing a conversion sequence, both
the current conversion and the sequence are terminated. The
conversion complete flags are cleared and any pending interrupts are
cancelled. Note that the control, test, and status registers are initialized
on reset; the initialized register state is defined in the register description
section of this specification.
Note that when the module powers up via a WAIT signal that the ATD is
not reset; ATD operation proceeds as it was prior to entering the wait.
Freezing the module does not cause it to be reset. If a freeze mode is
entered and defines that the current conversion be terminated, then this
is done and the module will be idle after exiting the freeze state, but the
module is not initialized.
Powering the module up (using the ADPU bit) does not cause the
module to reset since the register file is not initialized. Finally, writing to
control register ATDCTL4/5 does not cause the module to be reset; the
current conversion and sequence will be terminated and new ones
started; the conversion complete flags and pending interrupts will be
cleared. This is a restart operation rather than a reset operation because
the register file is not reinitialized.
There is one digital, 8-bit, input-only port associated with the ATD
module. It is accessed through the 8-bit Port Data Register (PORTADx).
Since the port pins are used only as inputs, in normal operating modes,
no data direction register is available for this port.
The input channel pins can be used to read analog and digital data. As
analog inputs, they are multiplexed and sampled to supply signals to the
A/D converter. As digital inputs, they supply input data buffers that can
be accessed through the digital port registers. Analog signals present on
the input pins at the digital sampling time that don’t meet the V
specification will return unknown digital values.
A read of PORTADx may affect the accuracy of an in progress sample
period but will not affect an in progress A/D conversion.
Analog-to-Digital Converter
General Purpose Digital Input Port Operation
Analog-to-Digital Converter
Technical Data
IL
or V
IH
357