DF2345TE20 Renesas Electronics America, DF2345TE20 Datasheet - Page 349

• Manufacturer Part Number: DF2345TE20
• Description: MCU 5V 128K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2345TE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 71
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2345TE20; HD64F2345TE20

9.4
9.4.1
Operation in each mode is outlined below.
Normal Operation: Each channel has a TCNT and TGR register. TCNT performs up-counting,
and is also capable of free-running operation, synchronous counting, and external event counting.
Each TGR can be used as an input capture register or output compare register.
Synchronous Operation: When synchronous operation is designated for a channel, TCNT for
that channel performs synchronous presetting. That is, when TCNT for a channel designated for
synchronous operation is rewritten, the TCNT counters for the other channels are also rewritten at
the same time. Synchronous clearing of the TCNT counters is also possible by setting the timer
synchronization bits in TSYR for channels designated for synchronous operation.
Buffer Operation
Cascaded Operation: The channel 1 counter (TCNT1), channel 2 counter (TCNT2), channel 4
counter (TCNT4), and channel 5 counter (TCNT5) can be connected together to operate as a 32-
bit counter.
PWM Mode: In this mode, a PWM waveform is output. The output level can be set by means of
TIOR. A PWM waveform with a duty of between 0% and 100% can be output, according to the
setting of each TGR register.
Phase Counting Mode: In this mode, TCNT is incremented or decremented by detecting the
phases of two clocks input from the external clock input pins in channels 1, 2, 4, and 5. When
phase counting mode is set, the corresponding TCLK pin functions as the clock pin, and TCNT
performs up- or down-counting.
This can be used for two-phase encoder pulse input.
When TGR is an output compare register
When a compare match occurs, the value in the buffer register for the relevant channel is
transferred to TGR.
When TGR is an input capture register
When input capture occurs, the value in TCNT is transfer to TGR and the value previously
held in TGR is transferred to the buffer register.
Operation
Overview
Rev. 4.00 Feb 15, 2006 page 323 of 900
Section 9 16-Bit Timer Pulse Unit (TPU)
REJ09B0291-0400