DF2345TE20 Renesas Electronics America, DF2345TE20 Datasheet - Page 490

• Manufacturer Part Number: DF2345TE20
• Description: MCU 5V 128K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2345TE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 71
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2345TE20; HD64F2345TE20

Section 12 Serial Communication Interface (SCI)
Serial data transmission (clocked synchronous mode): Figure 12.16 shows a sample flowchart
for serial transmission.
The following procedure should be used for serial data transmission.
Rev. 4.00 Feb 15, 2006 page 464 of 900
REJ09B0291-0400
Write transmit data to TDR and
clear TDRE flag in SSR to 0
Read TDRE flag in SSR
Read TEND flag in SSR
Clear TE bit in SCR to 0
All data transmitted?
Start transmission
Initialization
TDRE = 1
TEND = 1
<End>
Figure 12.16 Sample Serial Transmission Flowchart
Yes
Yes
Yes
No
No
No
[3]
[2]
[1]
[1] SCI initialization:
[2] SCI status check and transmit data
[3] Serial transmission continuation
The TxD pin is automatically
designated as the transmit data output
pin.
write:
Read SSR and check that the TDRE
flag is set to 1, then write transmit data
to TDR and clear the TDRE flag to 0.
procedure:
To continue serial transmission, be
sure to read 1 from the TDRE flag to
confirm that writing is possible, then
write data to TDR, and then clear the
TDRE flag to 0.
Checking and clearing of the TDRE
flag is automatic when the DTC is
activated by a transmit data empty
interrupt (TXI) request and data is
written to TDR.