DF2345TE20 Renesas Electronics America, DF2345TE20 Datasheet - Page 356

• Manufacturer Part Number: DF2345TE20
• Description: MCU 5V 128K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2345TE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 71
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2345TE20; HD64F2345TE20

Section 9 16-Bit Timer Pulse Unit (TPU)
9.4.3
In synchronous operation, the values in a number of TCNT counters can be rewritten
simultaneously (synchronous presetting). Also, a number of TCNT counters can be cleared
simultaneously by making the appropriate setting in TCR (synchronous clearing).
Synchronous operation enables TGR to be incremented with respect to a single time base.
Channels 0 to 5 can all be designated for synchronous operation.
Example of Synchronous Operation Setting Procedure: Figure 9.14 shows an example of the
synchronous operation setting procedure.
Rev. 4.00 Feb 15, 2006 page 330 of 900
REJ09B0291-0400
<Synchronous presetting>
[1]
[2]
[3]
[4]
[5]
Synchronous presetting
Synchronous operation
Set synchronous
Set to 1 the SYNC bits in TSYR corresponding to the channels to be designated for synchronous
operation.
When the TCNT counter of any of the channels designated for synchronous operation is
written to, the same value is simultaneously written to the other TCNT counters.
Use bits CCLR2 to CCLR0 in TCR to specify TCNT clearing by input capture/output compare,
etc.
Use bits CCLR2 to CCLR0 in TCR to designate synchronous clearing for the counter clearing
source.
Set to 1 the CST bits in TSTR for the relevant channels, to start the count operation.
Synchronous Operation
Set TCNT
operation
selection
Figure 9.14 Example of Synchronous Operation Setting Procedure
[1]
[2]
Synchronous clearing
<Counter clearing>
sourcegeneration
clearing source
Select counter
Start count
channel?
Clearing
Yes
No
[3]
[5]
<Synchronous clearing>
Set synchronous
counter clearing
Start count
[4]
[5]