DF2345TE20 Renesas Electronics America, DF2345TE20 Datasheet - Page 612

• Manufacturer Part Number: DF2345TE20
• Description: MCU 5V 128K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2345TE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 71
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2345TE20; HD64F2345TE20

Section 17 ROM
17.10.2 Software Protection
Software protection can be implemented by setting the SWE bit in FLMCR1, erase block registers
1 and 2 (EBR1, EBR2), and the RAMS bit in RAMER. When software protection is in effect,
setting the P or E bit in flash memory control register 1 (FLMCR1) does not cause a transition to
program mode or erase mode. (See table 17.17.)
Table 17.17 Software Protection
Item
SWE bit
protection
Block
specification
protection
Emulation
protection
Note:
Rev. 4.00 Feb 15, 2006 page 586 of 900
REJ09B0291-0400
* Program verify and erase verify modes.
Description
Clearing the SWE bit to 0 in FLMCR1 sets
the program/erase-protected state for all
blocks.
(Execute in on-chip RAM or external
memory.)
Erase protection can be set for individual
blocks by settings in erase block registers
1 and 2 (EBR1, EBR2).
However, write protection is disabled.
Setting EBR1 and EBR2 to H'00 places all
blocks in the erase-protected state.
Setting the RAMS bit to 1 in the RAM
emulation register (RAMER) places all
blocks in the program/erase-protected
state.
Program Erase
No
—
No
Functions
No
No
No
Verify *
No
Yes
Yes