MC912DG128A Motorola, MC912DG128A Datasheet - Page 46

• Manufacturer Part Number: MC912DG128A
• Description: Microcontrollers
• Manufacturer: Motorola

Port AD1
Port AD0
Port P
Pinout and Signal Descriptions
MC68HC912DT128A Rev 2.0
46
Setting the RDPIB bit in the IBPURD register configures all port IB
outputs to have reduced drive levels. Levels are at normal drive
capability after reset. The IBPURD register can be read or written
anytime after reset. Refer to section
This port is an analog input interface to the analog-to-digital subsystem
and used for general-purpose input. When analog-to-digital functions
are not enabled, the port has eight general-purpose input pins,
PAD1[7:0]. The ADPU bit in the ATD1CTL2 register enables the A/D
function.
Port AD1 pins are inputs; no data direction register is associated with this
port. The port has no resistive input loads and no reduced drive controls.
Refer to
This port is an analog input interface to the analog-to-digital subsystem
and used for general-purpose input. When analog-to-digital functions
are not enabled, the port has eight general-purpose input pins,
PAD0[7:0]. The ADPU bit in the ATD0CTL2 register enables the A/D
function.
Port AD0 pins are inputs; no data direction register is associated with this
port. The port has no resistive input loads and no reduced drive controls.
Refer to
The four pulse-width modulation channel outputs share general-purpose
port P pins. The PWM function is enabled with the PWEN register.
Enabling PWM pins takes precedence over the general-purpose port.
When pulse-width modulation is not in use, the port pins may be used for
general-purpose I/O.
Register DDRP determines pin direction of port P when used for
general-purpose I/O. When DDRP bits are set, the corresponding pin is
configured for output. On reset the DDRP bits are cleared and the
corresponding pin is configured for input.
Analog-To-Digital Converter
Analog-To-Digital Converter
Pinout and Signal Descriptions
Inter-IC
(ATD).
(ATD).
Bus.
MOTOROLA
20-pins